4 Ports UPOE Power Supply

Product Introduction:

Uninterruptible Power Supply POE, we also call UPOE (Uninterruptible Power Over Ethernet). The 4ports UPOE power supply is tailored specifically for communication companies to meet the standards or 802.3AT 802.3AF standard. It is developed by our company and communication company’s technical personnel according to its applied requirements, applied places, applied environments and other conditions. After applied in communication companies of many cities, the 4ports UPOE power supply gets very positive feedback and it turns out to be the updated product of ordinary UPS + POE power supply scheme.

Model:

UPOE4-160SI

Alias:

Uninterruptible Power over Ethernet

Application:

4ports UPOE power supply can be used in new networks of WLAN or established wireless networks WLAN without an uninterruptible power supply. It possesses the function that ordinary UPS and POE keep but takes an advantage over UPS + POE power supply scheme.

Main Features:

1. Less investment.
Compared with common centralized UPS uninterruptible power supply scheme, 4ports UPOE power supply can reduce 40% of investment costs.
2. Powerfulness.
It can achieve the AP, ONU or switch, and AP uninterruptible power supply has an alarm.
3. Simple construction
Construction of 4ports UPOE power supply is extremely simple, whether it is new or not. Modification can be carried out in the broadband box, greatly reducing the construction, coordination difficult. The original general transformation of uninterruptible power supply mode can be finished in a few minutes.

Advantages:

1. If 4ports UPOE power supply fails, it only effects the speed involved NU, AP.
2. Simple maintenance
If the UPOE uninterruptible power supply fails, you can unplug connectors and replace it directly. Non-professionals can also do this within 10 minutes.
3. Energy-saving
Compared with the use of common centralized UPS uninterruptible power supply scheme, UPOE uninterruptible power supply can save 30%. Extension of battery life and improvement of battery utilization can also be achieved.
4. Protection device
4ports UPOE power supply is equipped with input and output lightning protection measures and good electromagnetic compatibility, AC100V ~ 300V input range, -25 ℃ ~ +55 ℃ temperature range, to ensure the safety and reliability UPOE.
5. The UPOE uninterruptible power supply y takes a great advantage over traditional scheme, can certainly replace the traditional scheme, inverter + ONU (or switch) + POE. Its advantages follows: high reliability, high efficiency,low cost, no battery consumption with electric supply, acting as inverter without electric supply. However, compared with inverter, UPOE is more efficient, reliable with lower costs and it is preferred to be applied in construction of WLAN together by means of base station.

Specification of 4Ports UPOE Power Supply:

Items	Parameters	Remarks
Input Voltage Range	AC100V~AC300V	full load
Input Voltage Frequency Range	47Hz ~ 63Hz
Enter Cold surge current	≤60A	AC220V input, cold
Total power output	4 ;150W
Overall efficiency	≥ 83%	full load
Auxiliary output voltage	DC48V/DC12/DC160V
Battery float voltage	54V
Float voltage stability	<0.3%
Battery charge current	0.7 ~ 1A
Battery voltage alarm voltage	43 ~ 46V	dialing switch can be set
Cut off voltage	42V
Enter port numbers	4
Output port numbers	4
Each output parameter	DC48V/0.35A/19W
Total power output protection	self-recovery; each output network port over-current, short circuit protection
Alarm signal	communication failure alarm, low battery voltage alarm
Indicates	AC power supply, DC power supply, battery charging,
Output ripple and noise is	<80mV
Operating ambient temperature range	-25 ℃ ~ +55 ℃
Operating Relative Humidity	5% ~ 90% RH non-condensing
Input-output isolation voltage	AC1500V/10mA/60S
MTBF	MTBF ≥ 100000Hour
Dimensions of Module	4: 237 × 118 × 50
Installation dimensions	300 × 32 (R2.5)