CMA Co2 Laser Cutting Machine Power Supply

Description:

CMA Co2 laser cutting machine power supply is a specially developed matched high voltage power supply according to Yueming CMA Co2 laser cutting machine. The unique DB9 interface of this power supply is irreplaceable. With small size, nice outlook, light weight and simple operation, CMA laser power supply and Yueming CMA laser cutting machine and their main board have fine matching performance, and able to connect with laser directly, and no need of heavy and overheated ballast resistance. Power supply enables Co2 laser to start easier, perform better, improve transfer efficiency and prolong working life of Yueming CMA laser.

Application:

CMA Co2 laser cutting machine power supply is designed to sculpture and cut acrylic, fabric, double color sheet and rubber, etc.

Types:

1. HY-C80 80W CMA Co2 Laser Cutting Machine Power Supply
2. HY-C150-Y3 100-150W CMA Co2 Laser Cutting Machine Power Supply

Main features:

1. CMA Co2 laser cutting machine power supply is specially designed for CMA yueming laser cutting machine with DB9 pin and controlled by 0 ~ 3.3v analog signals or PWM control signal.
2. Special surface design with good performance and nice appearance.
3. Quick response speed and good effect: High performance and large cutting power. It also can prolong working life of laser tube.
4. Stable output current, the laser beam will be more stable and powerful when installing.
5. The output current can be adjusted by screw outside the shell.
6. With "TEST” button, CMA Co2 laser cutting machine power supply can test output laser manually.

Important Notes:

1. Open circuit for the high voltage output end is not allowed (The positive and negative terminals of the high voltage output end and the laser device shall be connected correctly).
2. Owing to the built-in bleeder resistor, CMA Co2 laser cutting machine power supply is able to discharge the residual voltage within two seconds after power failure. Just in case, please handle carefully under such conditions so as to avoid electric shock. (Make sure the insulation safety requirements of 40KV high voltage at both ends of high voltage.)
3. CMA Co2 laser cutting machine power supply shall be used in combination with three-pin sockets which come with grounding terminal. Chassis shall be strictly grounded to avoid electrical shock.

Product Maintenance:

1. Please keep laser power supply clean to avoid dust accumulation around the high voltage electrode. Also, the system shall be kept dry and away from metals so as to avoid high voltage electro-discharging.
2. Good heat dissipation shall be ensured.

Service advantage:

1. 24-hour technical support by email or calling.
2. User-friendly English manual for power supply usage and maintenance.

Package, delivery and payment:

Package:Carton Box
Delivery:By sea, by air or by express
Payment:TT, PayPal, Western Union 100% in advance