80W Co2 Laser Power Supply

Description:

Model: HY-T80 Co2 Laser Power Supply for 80w Co2 Laser Glass Lamp.
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of Laser Tube Power Supply:

HY-T80 Laser Power Source is designed for 60W and 80W cutting and engraving acrylic, fabric, double color sheet and rubber, etc.

Main Features:

1. Good compatibility: Laser power source can be used for 80W laser tubes manufactured by different factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 40KV.
3. You can choose Cutting Type or Sculpting Type; the Cutting Type has a good power stability and strong adaptability; the Sculpting Type has a quick response speed and good engraving effect.
4. Laser power source has "TEST” button which can test output laser manually.
5. HY-T80 Power Supply has high Output Power and good stability, which can prolong laser tube's working life.

Advantages of Laser Tube Power Supply:

1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. Laser power source has output open circuit protection.
3. HY-T80 High Voltage Laser Power Supply has TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH	Input Signal	On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL	Input Signal	On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP	Input Signal	On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G	GND	This foot must be connected well with the laser machine shell and the ground of control board.
IN	Input Signal	The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V	Output Power	Output 5V, the maximum output current is 20mA.

Specification of Laser Tube Power Supply HY-T80

Input	Input Voltage	AC220V or AC110V(Please be specified when placing order)
	AC frequency	47—440HZ
	Max Input Power	550W
	Max Input Current	5A
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7MA(AC220V Input)	≤0.4MA(AC110V Input)
Output	Max Output Voltage	≥DC40KV(AC220V input, output no-load)
	Max Output Current	≥DC 28mA
Efficiency	≥90% (full load)
MTBF	≥10000H
Response Speed	≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Withstand Voltage	Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment	Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=280×173×97 (mm)
Color	Black

Technical Support:

1. Our laser power source pass ISO9001 and CE.
2. We are manufacturer of Co2 laser power source, and stick to firm quality control system, so that we can supply the best quality products with lowest prices for our client.
3. With a professional technical support group, we can assist you. Please do not hesitate to contact us if you have any product problem.
4. Manual testing: Make sure the power supply and laser tube wiring are right firstly, offline the control line and then press red button " TEST” to test whether laser tube emit light or not. This method can be served as a simple judgment as whether laser power source is working or not.

Warranty:

Our CO2 laser power source is available with one year warranty. If problem occurs during this period, we can send you Free Parts for your repairing.