100W-120W Co2 Laser Power Supply

Description:

Model:

HY-W120 CO2 Laser Power Supply for 80w, 100w, 120w Co2 Laser Glass Tubes.

Alias:

CO2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of Co2 Laser Power Supply:

HY-W120 Laser Power Supply for laser machine for 80W, 100W and 120W cutting and engraving acrylic, fabric, double color sheet and rubber, etc.

Main Features:

1. Very wide range of Input Voltage: AC160-AC260V (Against Input Voltage is 220V)The Current change rate less than 1%.
2. High stability of current: in the range of Input AC160-AC260V, current change rate is less than 1%.
3. Good compatibility: Laser machine power supply can be used for 80W, 100W and 120W laser tubes manufactured by different factories.
4. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 40KV.
5. Laser machine power supply has "TEST” button which can test output laser manually.
6. HY-W120 Co2 laser power supply is endowed with high output power and good stability, which can prolong laser tube's working life.

Advantages:

1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. Laser machine power supply has output open circuit protection.
3. It has TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH	Input Signal	On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL	Input Signal	On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP	Input Signal	On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G	GND	This foot must be connected well with the laser machine shell and the ground of control board.
IN	Input Signal	The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V	Output Power	Output 5V, the maximum output current is 20mA.

Specification of Co2 Laser Power Supply HY-W120;

Input	Input Voltage	AC220V or AC110V(Please be specified when placing order)
		AC160-AC260V(Against Input Voltage is 220V)
	AC Frequency	47—440HZ
	Max Input Power	700W
	Max Input Current	8A
Output	Max Output Voltage	≥DC40KV(AC220V input, output no-load)
	Max Output Current	≥DC 32mA (AC160-260 Input can run 130w Laser Tube with full load)
Efficiency	≥90% (full load)
MTBF	≥10000H
Response Speed	≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Withstand Voltage	Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment	Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=325×173×97 (mm)
Color	Black

Technical Support:

1. Our laser machine power supply passes ISO9001 and CE.
2. We are manufacturer of Co2 laser machine power supply, and stick to firm quality control system, so that we can supply the best quality products with lowest prices for our client.
3. With a professional technical support group, we can assist you. Please do not hesitate to contact us if you have any product problem.
4. Manual testing: Make sure the power supply and laser tube wiring are right firstly, offline the control line and then press red button " TEST” to test whether laser tube emit light or not. This method can be served as a simple judgment as whether laser machine power supply is working or not.

Warranty:

Our CO2 laser machine power supply is available with one year warranty. If problem occurs during this period, we can send you Free Parts for your repairing.